PFXGM4301TAD Manual Proface Smart Camera PFXGM4301TAD User's Manual

The guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display. Disposable battery (1 blocks) for backing up clock data.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface Smart Camera User's Manual. Input voltage: AC100~240V.
Screen size: 12.1 inches PFXGM4301TAD
Display type (resolution):65536 color TFT display LCD (SVGA 800 x 600 pixels).
Touch panel type: matrix.
Memory: 32MB (internal memory), SRAM320KB (backup memory), SRAM64KB (variable area).
Ethernet interface: 1.
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1 Proface Smart Camera User's Manual.
Replaceable battery: yes.
Alarm analysis function block: yes.
Panel opening size:
Wide 301.5 x high 227.5mm (+1/0mm).
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Enhance the display effect.
All models are using 65535 color LCD TFT, and has the high brightness control function of the backlight.
Exquisite picture not only improves the quality of monitoring, but also increases the safety of operation Proface Smart Camera User's Manual.
Mobile terminal remote monitoring.
With light and portable iPhone, iPad, touch iPod and other mobile terminal remote monitoring of large or long distance applications, large-scale processing system or production site of a number of machines PFXGM4301TAD User's Manual. With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /13 or ATEX certification (5 / set) PFXGM4301TAD User's Manual. Used to install the man-machine interface to the fixed panel. (4 / set)5.7 inch screen protective cover (1 pieces)Touch screen anti ultraviolet protective film (1 pieces).GP4000E series entry-level programmable man-machine interface.
Screen size: 10 inch widescreen PFXGM4301TAD User's Manual.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot, vision sensor, etc..
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce tthe cost of the modules to be added after connecting these controllers with PLC PFXGM4301TAD Manual.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intruusion Proface Smart Camera User's Manual.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.