PFXGP4501TADC Manual Proface PFXGP4501TADC User's Manual

The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail.Suitable for LT4000M/GP4000M series modules, 5.7 inch. Type: there is an emergency stop switch (gray) and a key switch.
Display type: TFT color LCD Proface PFXGP4501TADC User's Manual.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing) PFXGP4501TADC
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey.
3 position enable switch with forced contact disconnect function.
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD Proface PFXGP4501TADC User's Manual.
High definition and wide viewing angle to bring excellent visual effects.
Easily replace GP3000H series. Analog /NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points Proface PFXGP4501TADC User's Manual.
Built in DIO output: 6 points.
Built in AIO input: 4 points.
Built in AIO output: 2 points.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface PFXGP4501TADC Manual.
Integrated design.
Adopt integrative design, compact structure,
When the installlation is only required to open a hole in the panel 22mm PFXGP4501TADC Manual.
The display module or the control module can be easily replaced when the fault is eliminated.