PLC CP1L-EM30DT1-D Manual OMRON CP1L-EM30DT1-D OPERATION MANUAL

CV500-RT SYSMAC BUS Remote I/O Slave Unit (wired) CV500-RT221.
Wire Type.Model: C200H-ME432.
Description: EEPROM, 4K words, battery back-up.with clock(CPU21, CPU23 only).CV500-RT SYSMAC BUS Remote I/O Slave Unit (optical) CV500-RT211.
Light type.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units CP1L-EM30DT1-D Manual.
points Input: 4 inputs.
Signal range selection:
Set separately for each input CP1L-EM30DT1-D
I/O type: B, E, J, K, N, R, S, T, ±80mV.
Conversion speed: 150 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.15A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices CP1L-EM30DT1-D Manual.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them CP1L-EM30DT1-D Manual.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON CP1L-EM30DT1-D OPERATION MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring OMRON CP1L-EM30DT1-D OPERATION MANUAL.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Product name: CJ-series I/O Control Unit.
Specifications: Mount one I/O Control Unit,
on the CPU Rack when connecting one or,
more Expansion Racks OMRON CP1L-EM30DT1-D OPERATION MANUAL.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Connnected Unit:
CJ1W-II101 I/O Interface Unit,
Mount to the right of the CPU Unit CP1L-EM30DT1-D .
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controlller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable CP1L-EM30DT1-D Manual.