Power Controller CA1-STDLRG-01 Manual Proface CA1-STDLRG-01 User's Manual

Use external output for the GP3000 series of auxiliary connectors (5 / sets).Adapter for EX module (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.Used to convert RGB to DVI-A12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA1-STDLRG-01 Manual CA1-STDLRG-01 COM2 adapter for converting the COM2 interface to the RS-422 terminal block10.4 inches (TFT), the replacement of the host backlight (1).Engineering documents created by the LT interface to download images and logic programming software through the USB interface.COM1 interface with the cable for direct connection to the CPU series PLC ASuitable for GLC2300 seriesUsed to convert the USB interface to the serial interface (RS-232C) CA1-STDLRG-01 Manual. A modem or bar code reader that can be connected to support RS-232C.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening CA1-STDLRG-01 Manual. Adapter for EX module (5 / set)Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Used in a variety of host and man-machine interface for RS-422 connectionThe main controller is connected to the man-machine interface for MPI communicationDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceThe host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication Proface CA1-STDLRG-01 User's Manual Proface CA1-STDLRG-01 User's Manual. 7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor 5 Proface CA1-STDLLRG-01 User's Manual CA1-STDLRG-01 . 7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 innch GP2500 (TFT) in the installation of the required accessories CA1-STDLRG-01 Manual. 5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.