Proface CA4-ATM10-01 User's Manual CA4-ATM10-01 Manual

Touch panel operation for RGB input modules (Master - from: Mini-B)12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) CA4-ATM10-01 User's Manual. COM1 interface with the cable for direct connection to the CPU series PLC AMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine CA4-ATM10-01GP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panel5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set) CA4-ATM10-01 User's Manual. Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Adapter for EX module (5 / set)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA4-ATM10-01 User's Manual. COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceExtended cable for connecting USB (Type-A) (LT) interface.Suitable for GLC2300 series128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master station256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the CCOM1 interface of the man-machine interface CA4-ATM10-01 Manual. 13 pin input connectors for HTB and 16 pin output connectors. (1 / set)Engineering documents created by the LT interface to download images and logic programming software through the USSB interface CA4-ATM10-01 Manual. Protection for GP rear connectors (large and small for each of the 1).Extension cable for connecting USB (Type-A) interface to front panel.