Proface PROFACE ST and GP Series ATEX Instruction Guide Manual PROFACE ST and GP Series ATEX Instruction Guide User's Manual

15 pin I/O joint (joint Ax1, joint Bx1) and 6 pin I/O connector (joint Cx 1, connector Dx1). Note: joints A and B are different, the joints C and D different.LT4000M (module type DIO), NPN output, DC24V (host).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function PROFACE ST and GP Series ATEX Instruction Guide User's Manual. (1)Input voltage: DC24V PROFACE ST and GP Series ATEX Instruction Guide
Screen size: 7.5 inches.
Display type (resolution):65536 color TFT (VGA 640 x 480 pixels).
Touch panel type: analog resistance.
Memory: 32MB (internal memory), SRAM320KB (backup memory), SRAM64KB (variable area).
Ethernet interface: 1.
Serial port: RS-232C * 1, RS-422/485 * 1.
SD card slot (max 32GB):1.
USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1 PROFACE ST and GP Series ATEX Instruction Guide User's Manual.
Replaceable battery: yes.
Alarm analysis function block: yes.
Panel opening size:
Wide 204.5 x high 159.5mm (+1/0mm).
Panel thickness: 1.6-5mm, chamfer radius is less than R3.
Back mounted model: there.
Enhance the display effect.
Meet a number of standards to support a wide range of applications
The coating components are widely used in various working environments, and are in line with the international standards PROFACE ST and GP Series ATEX Instruction Guide User's Manual.
Remote data acquisition and management.
Human machine interface, which is installed on the production machine,
With EX Microsoft software combined with Office Pro-Server and SQL and other standard PC software,
Can be simple and economical to establish a set of data management system, and effectively improve the quality of production and efficiency. Touch screen anti ultraviolet protective film (1 pieces).A veneer, for the GP4000 series back loading models of full flush (white, 1)DIO model /PNP output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA).
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 20 points.
Built in DIO output: 10 points.
Built in AIO input: No.
Built in AIO output: No.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input.
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small sppace, even if the space is limited, but also can be flexible to install PROFACE ST and GP Series ATEX Instruction Guide Manual.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.

The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface PROFACE ST and GP Series ATEX Instruction Guide Manual.