Programmable Terminals CS1G-CPU44-V1 Operation Manual OMRON CS1G-CPU44-V1 Manual

Output method: Transistor sourcing.
Inputs: 12.
Outputs: 8.Name: Temperature Control Module.
Model: C200H-TC001.
Sensor: Thermocouple: R, S, K(CA), J(IC), T(CC), E(CRC), B, N, L(IC), U(CC).
Control output: Transistor outputPower supply: AC power supply.
Output method: Transistor output sink type.
Inputs points: 18 points CS1G-CPU44-V1 Operation Manual.
Outputs points: 12 points.Unit classification: CJ1 Special I/O Units CS1G-CPU44-V1
Product name: Isolated type DC Input Units.
Input points: 2 inputs.
Signal range selection: DC voltage:
0 to 1.25 V, -1.25 to 1.25 V, 0 to 5 V,
1 to 5 V, -5 to 5 V, 0 to 10 V, -10 to 10 V,
±10 V selectable range DC current:
0 to 20 mA, 4 to 20 mA.
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000 CS1G-CPU44-V1 Operation Manual.
Accuracy at ambient temperature of 25°C:
Accuracy: (±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 24V, 0.09A.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e.g., 4 to 20 mA or 1 to 5V) CS1G-CPU44-V1 Operation Manual.
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage).
All inputs are isolated. C200H Discrete I/O Data Access Console C200H-DAC01Name: Three-tier Screw Terminal Block OMRON CS1G-CPU44-V1 Manual.
Specifications: Inputs; 16 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection OMRON CS1G-CPU44-V1 Manual.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction OMRON CS1G-CPU44-V1 Manual.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Connecting I/O control module and interface module.
Cable length: 0.7 m.Name: CS1D Duplex Unit.
Specifications: Applicable sysstems,
Duplex CPU, Dual I/O Expansion System only;
Basic functions, Duplex CPU Unit processing,
error monitoring, and CPU Unit switching,
when error occurs;
Online Replacement, Supported CS1G-CPU44-V1 .
Current consumption: 5V system, 0 CS1G-CPU44-V1 Operation Manual. 41A;
26 V system, --.
Standards: UC1, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.