Safety Light Curtain PFXGP4115T2D Instruction Manual Proface PFXGP4115T2D Manual

SP-5500TP+SP-5B40 combination.
Screen size: 10 inches (XGA).
Multi touch: support.
Windows applications: support.
Application storage space: 64MB (CFast card).
Video / audio: support.
CFast card: 2.
SD card: 1.
USB interface Type-A:4.
USB interface Mini-B:2.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V PFXGP4115T2D Instruction Manual.
SP-5500TP+SP-5B10 combination.
Screen size: 10 inches (XGA) PFXGP4115T2D
Multi touch: support.
Windows applications - -.
Application storage space: 64MB (SD card).
Video / audio: -.
CFast card: -.
SD card: 2.
USB interface Type-A:3.
USB interface Mini-B:2.
Serial port: 2.
Ethernet port: 2.
Rated voltage: DC24V.
On some occasions, you need to embed the PC into the machine, so that you can use the Windows application,
At this time the intelligent man-machine interface is the ideal choice PFXGP4115T2D Instruction Manual.
Some special applications can be run on the intelligent human computer interface.
Intelligent human computer interface can save the manual and a variety of development tools.
In this way, every time the implementation of maintenance work, you do not need to carry the PC to the scene.5.7 inches, installed to provide the function of dust and moistureType: there is an emergency stop switch (gray) and a key switch PFXGP4115T2D Instruction Manual.
Display type: TFT color LCD.
Display size: 5.7 inch.
Display color: 65536 color (no flicker), 16384 color (flashing) Proface PFXGP4115T2D Manual.
Resolution (pixel) x:640 480 (VGA).
Memory: 32MB.
Data backup: 320KB SRAM.
Emergency stop switch provides 3 colors of red, yellow and grey Proface PFXGP4115T2D Manual.
3 position enable switch with forced contact disconnect function.
Key switch without pressing the emergency stop switch can also be mobile devices.
Very light.
The high visibility of the configuration of the 65536 color TFT color LCD.
High definition and wide viewing angle to bring excellent visual effects Proface PFXGP4115T2D Manual.
Easily replace GP3000H series. Connector for connecting DC power cord (5 / set).LT4000M (module type DIO), NPN output, DC24V (host).10.4 inches (STN), the replacement of the host backlight (2 / set).GP4000E series entry-level programmable man-machine interface.
Screen size: 7 inch widescreen.
Display type: TFT color LCD.
Resolution: 800 x 480 pixels (WVGA).
Display color number: 65536 color.
Backlight: LED.
Internal memory: EPROM FLASH 32 MB.
Backup memory: EPROM FLASH 128 KB.
Interface: RS-232C, RS-422/485, Ethernet, USB.
Voltage: DC24V.
More humanized design.
USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.
Sliding type battery cabin, so that more convenient to replace the battery.
3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,
And can be directly connected with other controllers (SCM, thermostat),
Helps to reduce the cost of the modules to be added after connecting these controllers with PLC.
Take time for the bad production environment
Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion.
PCBA reinforced coating process (fully automatic mechanical coating),
Farewell to the use of dust, humidity and other harsh environment concerns.
Easy to direct.
GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,
Such as PLC, motion controller, robot,, vision sensor, etc PFXGP4115T2D . .
Expanding business.
All hardware can be used to create the required EX GP-Pro screen.
All hardware equipment using the same development platform, is conducive to the development of new business. PFXGP4115T2D Instruction Manual.
Reduce the burden of CPU PLC.
GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.