Vision Sensor ZN-A6112 COMMUNICATIONS MANUAL OMRON ZN-A6112 Manual

Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Unidirectional short hinge roller lever; Parallel.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZN-A6112 COMMUNICATIONS MANUAL ZN-A6112
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: Diffuse reflective; Regular reflective.
Measurement range: Height direction, 100±12 mm, 94±10 mm;
Width direction, 22 mm (typical) ZN-A6112 COMMUNICATIONS MANUAL.
Resolution: Height direction, 2.5 μm;
Width direction, 35 μm (22mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Optical system: positive and negative radiation.
Detection distance: 20 positive and negative 1mm.
Beam shape: linear beam.
Beam diameter: 1.0mm * 20 m.
Resolution: 0.25 M.
Cable length: 0.5m. Shape: Cylindrical.
Dimensions: 8 dia. x 22 mm ZN-A6112 COMMUNICATIONS MANUAL.
Sensing distance: 2 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function OMRON ZN-A6112 Manual.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit OMRON ZN-A6112 Manual.
Prevent mutual interference for up to five Units by using a Calculating Unit. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Hinge lever; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy OMRON ZN-A6112 Manual.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Connection method:: Pre-wired ZN-A6112 .
Cable length: 5 m.
Sensing distance: 300 ± 150 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece ZN-A6112 COMMUNICATIONS MANUAL.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.