ZEN-10C1DT-D-V1 REFERENCE MANUAL OMRON ZEN-10C1DT-D-V1 Manual

Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Low-force hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types OMRON ZEN-10C1DT-D-V1 Manual.
A series of standard models for micro loads is available ZEN-10C1DT-D-V1
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Power supply voltage: DC24V.
Control output: PNP output. Cable length: 8 m.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website OMRON ZEN-10C1DT-D-V1 Manual. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Provided.
Actuator: Hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types OMRON ZEN-10C1DT-D-V1 Manual.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Shape: Screw-shaped.
Dimensions: M18 x 46.3 mm.
Sensing distance: 7 mm.
Resolution: 1 μm.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching).
Easily perform calculation for two Sensors by using a Calculating Unit.
Prevent mutual interference for up to five Units by using a Calculating Unit. Item: BNC-Crocodile Cable (2 m) (For ZR-RX70).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. Connection method: Pre-wired ZEN-10C1DT-D-V1 REFERENCE MANUAL.
Cable length: 2 m.
Sensing distance: 100 ± 35 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece ZEN-10C1DT-D-V1 REFERENCE MANUAL.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.