ZUV-L4S Manual OMRON ZUV-L4S USER'S MANUAL

Power supply: DC.
Output type: PNP.
High-accuracy Detection of Metal Workpiece Displacement.
Sensor Heads support a wide variety of applications.
Linearity can be adjusted for non-ferrous metals,
such as SUS and aluminum, using the material selection function.
Simple linearity compensation (teaching) OMRON ZUV-L4S USER'S MANUAL.
Easily perform calculation for two Sensors by using a Calculating Unit ZUV-L4S
Prevent mutual interference for up to five Units by using a Calculating Unit. Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Leaf spring.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy OMRON ZUV-L4S USER'S MANUAL.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Optical system: positive and negative radiation.
Detection distance: 20 positive and negative 1mm OMRON ZUV-L4S USER'S MANUAL.
Beam shape: point beam.
Beam diameter: diameter of 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Size: 8 dia.
Type: Standard type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Coonnection method: Pre-wired ZUV-L4S Manual.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: NPN output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece ZUV-L4S Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.