ZW-XCP2E Manual OMRON Smart Sensors ZW-XCP2E User's Manual

Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam.
Beam diameter: 1.0mm * 30 m.
Resolution: 0.25 M.
Cable length: 2m. Power supply: DC.
Output type: NPN.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website OMRON Smart Sensors User's Manual. Actuator: Sealed (Booted); Sealed plunger; AC ZW-XCP2E
Mounting: Side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches OMRON Smart Sensors User's Manual. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON Smart Sensors User's Manual. )Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0 ZW-XCP2E User's Manual. 6 M.
Cable length: 0.5m. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 0.9A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC ZW-XCP2E User's Manual.
Ionization time: 1.5 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max ZW-XCP2E User's Manual. , load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weigght (Packaged): Approx ZW-XCP2E Manual. 0.6 kg (Approx. 1.2 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, L-mounting bracket, Streamer.
This ionizer series is designned to go anywhere OMRON Smart Sensors User's Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues.