ZX-EDA11 Manual OMRON Smart Sensors ZX-EDA11 User's Manual

Type: Narrow View/Single Function.
PNP.
Low-cost but advanced Smart.
Sensors combining benefits of.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching.
LCD monitor.
Ultra-high speed response for fast-moving.
production lines OMRON Smart Sensors User's Manual. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 1 ZX-EDA112A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual) OMRON Smart Sensors User's Manual.
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing) OMRON Smart Sensors User's Manual.
Weight (Packaged): Approx. 1 kg (Approx. 1.8 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer ZX-EDA11 User's Manual.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues ZX-EDA11 User's Manual. Optical system: Diffuse reflective.
Beam shape: Spot beam.
Sensing distance: 40±10 mm.
Resolution: 2 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Optical system: positive and negative radiation ZX-EDA11 User's Manual.
Detection distance: 25 positive and negative 2mm.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 0.5m. Connection method: Prre-wired ZX-EDA11 Manual.
Cable length: 5 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece OMRON Smart Sensors User's Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.