ZX-SAM14 Manual OMRON HMI ZX-SAM14 Introduction Manual

Appearance: Sensor head: Anchored type.
Temperature: Measurement range, 0 to 60°C;
Measurement precision, ±0.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 20 to 85%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
Accessories: Mounting screw (M3 x 8) x 1 Caps to secure cable,
(one for each, front and rear) OMRON HMI Introduction Manual ZX-SAM14
Easy temperature and humidity control with an SD Card. Size: 8 dia.
Type: Standard type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: Momentary operation OMRON HMI Introduction Manual.
Shape of Operation Unit: 36 dia. 25 dia.
Output: 1.
Operation Unit color: Red (-R).
Long Service Life with Built-in Z-series.
Basic Switch.
Using a Basic Switch enables direct switching of large-capacity loads.
Shock-absorbing construction of Operation Unit protects the Switch.
Drip-proof Pushbutton construction enables use in locations subject to,
splashing water and oil and scattering dust OMRON HMI Introduction Manual.
Pushbuttons are available in three shapes and six colors. Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam.
Beam diameter: 1.0mm * 30 m.
Resolution: 0.25 M ZX-SAM14 Introduction Manual.
Cable length: 2m. Optical system: Diffuse reflective.
Beam shape: Line beam.
Sensing distance: 300±200 mm.
Resolution: 300 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZX-SAM14 Introduction Manual. Item: RS-232C Cable for PLC/programmable terminal.
Cable length: 2m.
To achieve a compact Sensor Head and high-resolution measurements,
the ZW Series uses a white light confocal principle to detect objects ZX-SAM14 Introduction Manual.
This principle is described below. For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Classification: Standard.
Contact gap: G (0.5 mm).
Actuator: Hinge roller lever; Large roller.
Best-selling Basic Switch Boasting.
High Precision and Wide Varietyy ZX-SAM14 Manual.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series off standard models for micro loads is available OMRON HMI Introduction Manual.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available.