FX2N-2DA Analog output module MITSUBISHI FX2N-2DA Voltage output and current output of 2 channels can be carried out

Use: power cord for basic unit.
Length: 1.0m.
Auxiliary parts for FX3GC and FX3UC. Analog input expansion board (2 channel).
Can be installed in FX1N, PLC FX1S, providing 2 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space FX2N-2DA.
Can be mixed with the use of voltage input and current input.
> Voltage input: DC0~10V, DC0~5V.
Current input: DC4~20mA.
Number of channels: 2 channel analog.
Applicable PLC:FX1N, FX2N, FX3U, FX2NC (to FX2NC-CNV-IF) FX2N-2DA.
Applicable PLC:FX3UC (to FX2NC-CNV-IF or FX3UC-1PS-5V).
High precision analog output module with 12 bit resolution.
Voltage output and current output of 2 channels can be carried out.
Can be specified for each channel voltage or current output. Input and output form: DC input, relay output FX2N-2DA.
Input points: 4 points.
Output points: 8 points.
Because all models of FX series are built in high speed counter,
So the high speed control can be realized by the simple procedure.
The input of the basic unit is built in the anti jitter filter,
One part as digital filter,
Sensitivity adjustment unit can reach 1ms MITSUBISHI FX2N-2DA.
Using high speed counter automatically adjusted to the minimum value.
Through the high cost of the built-in positioning function and the expansion function to increase the number of control axis.
Extended function expansion board and special adapter,
Data links and communication with external serial devices MITSUBISHI FX2N-2DA.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect MITSUBISHI FX2N-2DA.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point. The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 FX2N-2DA.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.