MITSUBISHI FX3GA-40MR-CM PLC

Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Power: 15kw.
Voltage: 200V.
There are 100% braking torque output in continuous regeneration, which can correspond to the continuous regeneration operation of the pipeline control.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space and reduce the comprehensive cost FX3GA-40MR-CM.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving FX3GA-40MR-CM. The operation, monitoring, parameter modification and other operations can be carried out by computer or PLC.Max input / output points: 16 points.
Power supply voltage: 24VDC MITSUBISHI FX3GA-40MR-CM.
Input points: 8 points.
Output points: 8 points FX3GA-40MR-CM.
Output type: relay.
Power consumption: 20W.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard MITSUBISHI FX3GA-40MR-CM.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register MITSUBISHI FX3GA-40MR-CM.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type) FX3GA-40MR-CM.
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable.