OMRON SGE-225-0-3560 05000C-05000C SGE-225-0-3560 05000C-05000C

Contact type: Standard load (250 VAC, 2 A; 125 VDC 0.4 A).
Operation: Alternate operation (Self-holding).
Output: SPDT.
Lighting: LED, 5 VDC.
Operation Unit color symbol: Enter the desired color symbol for the,
Pushbutton in @ R (Red); Y (Yellow); G (Green); A (Blue); W (White).
Pushbutton Switch Series with OMRON SGE-225-0-3560 05000C-05000C.
Square 40-mm Body.
Combines miniature design with distinct but soft sense of operation SGE-225-0-3560 05000C-05000C
Easy panel mounting from the front and simple lamp replacement.
without tools. Size: M30, Shielded.
Sensing distance: 15.0 mm.
Connection: Pre-wired.
Body material: Brass OMRON SGE-225-0-3560 05000C-05000C.
Thread length (overall length): 66 (86).
Output configuration: PNP.
Operation mode NC.
Safe Mounting with Greater .
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization OMRON SGE-225-0-3560 05000C-05000C. Terminal (Wire connection): Push-In Plus Terminal.
Classification: Standard .
Latching lever (Test switch): No.
Rated input voltage: AC/DC, 24V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel.
Realized opening and closing ability with one pole 6 A slim shape.
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Actuator: Roller lever: R38.
Item: High-sensitivity.
Connector shape: Threaded (M12).
Built-in switch type: General-purpose.
Voltage: DC.
Wiring locations: NO only 2 core.
Connector pin No: NO 3 4 .
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environmennt-resistant, and Spatter preventtion Switches SGE-225-0-3560 05000C-05000C.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, aandd four-direction head mounting SGE-225-0-3560 05000C-05000C.
Approved standards: EN/IEC, UL, cUL, and CCC.
Contact your OMRON representative for information on approved models.
SGE-225-0-3560 05000C-05000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-0-3560 05000C-05000C&select=5