OMRON SGE-245-0-0820 02000C-02000C Price SGE-245-0-0820 02000C-02000C

Time specification: Inverse type.
Current setting range: 50 to 160 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage SGE-245-0-0820 02000C-02000C Price.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase SGE-245-0-0820 02000C-02000C
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation SGE-245-0-0820 02000C-02000C Price.
Space-saving, integrated construction.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Number of notches: 2 notches SGE-245-0-0820 02000C-02000C Price.
Output: DPDT.
Reset method: Manual.
Key release position: Left and right.
Separate Construction with Cylindrical .
16-dia. Body.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models. Number of beams: 48.
Protective height: 990mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Setting range: 0.1 to 1 A AC/DC, 0.5 to 5 A AC/DC, 0.8 to 8 A AC/DC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents or undercurrents.
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A).
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
One SPDT output relay, 5 A at 250 VAC (resistive load).
Output relay can be swittched between normally open and normallly closed OMRON SGE-245-0-0820 02000C-02000C.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply. Ultra small rotary encoder (diameter 20), incremental.
Machine built in mini 1046.
The size and resooluution of 1000P/R diameter 20mm OMRON SGE-245-0-0820 02000C-02000C.
Axle and hollow shaft type.
Power supply voltage: DC5V.
Output form: voltage output.
Axis shape: shaft extension.
SGE-245-0-0820 02000C-02000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-0-0820 02000C-02000C&select=5