OMRON SGE-245-2-1300 00500C SGE-245-2-1300 00500C

Appearance: Round/Flat with Voltage Reduction Unit M22-F.
Lighting: LED.
Operating voltage: 200 VAC.
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Round Indicator Series with 22 dia. and.
25 dia. (when using a ring).
Same type as the A22-series Pushbutton Switches.
Use 25-dia OMRON SGE-245-2-1300 00500C. ring to install in 25-dia. panel cutouts.
IP65. Field of view: Wide View (Short-distance) SGE-245-2-1300 00500C
Number of pixels: 760,000 pixels.
Color: PNP.
Field of view/Installation distance: Refer to figure 8 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all OMRON SGE-245-2-1300 00500C.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller .
This new Smart Camera was designed to attract,
potential customers to try the FQ2 Series. Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 2 notches OMRON SGE-245-2-1300 00500C.
Resetting method: Manual.
Output: SPST-NO + SPST-NC.
Operating voltage: 200 VAC .
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Type: 1C contact type.
Shape: round.
Terminal shape: terminal for printed board.
Action: instantaneous.
Display mode: LED display.
Operation Department color: yellow.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut.
Can be switched from micro load (minimum applicable load 1mmA DC5V) to large capacityy load SGE-245-2-1300 00500C. E32-T24S type: special beam type; wafer mapping,
Specialty: long distance away from the mouth 6 degrees,
Bending radius (mm): R10.
Fiber element for meeting diversified needsFree change detection direction.
Detectiionn direction can be according to the front, side (up and down, around 90 units) change SGE-245-2-1300 00500C.
Can be similar to the feeling of a limit switch installation.
SGE-245-2-1300 00500C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-245-2-1300 00500C&select=5