OMRON WLD18-TH-N WLD18-TH-N

Input capacity: 16 points.
Rated current (ON current):
0.5 A/output, 4.0 A/common.
Internal I/O common: PNP.
Residual voltage: 1.2 V max.
(0.5 ADC, between each output,
terminal and the V terminal).
Leakage current: 0.1 mA max.
ON delay: 0.5 ms max.
OFF delay: 1.5 ms max.
Number of circuits per common: 16 points/common OMRON WLD18-TH-N.
Output indicators: LED display (yellow).
Isolation method: Photocoupler isolation WLD18-TH-N
I/O power supply method: Supply by I/O power supply.
Unit power supply current consumption: 90 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
I/O power supply current con sumption: 5 mA max.
(for 20.4 to 26 OMRON WLD18-TH-N. 4-VDC power supply voltage)
Weight: 180 g max.
Expansion functions: Enabled .
Output handling for communications errors:
Select either hold or clear.
Short-circuit protection function: No.
High-speed digital I/O terminal with the,
screw type terminal block for EtherCAT,
communications.
Detachable screw terminal block facilitates,
the maintenance.
The expansion unit can be connected OMRON WLD18-TH-N.
(One expansion unit per one I/O terminal unit.)
Input/output point can be flexibly increased,
depending on the system .
Input response time can be switched for,
high-speed processing.
Selectable node address setting methods:
setting with rotary switch and with tool software.
When setting the nodes with rotary switch,
setting is easy and node identification becomes,
possible for maintenance. High performance price ratio standard type proximity sensor.
Standard cable protector.
The new DC two-wire type.
Non polar proximity sensor.
Type: DC / wire type.
Polarity: none.
Shape: shield, M30.
Detection range: 10mm.
Action mode: NO. Shape: rectangle.
Protection structure: IP40.
Operation Department color: yellow.
The 8 round series.
And button switch A3D series of the same.
High brightness uniform surface luminescence.
Because it is round, so easy to punch. Type: AC/DC/battery .
Key features and benefits.
Made specifically for pick & place,
applications.
Encoder input for conveyor tracking,
and calibration.
Shape based object detection.
Smart calibration wizard.
Sysmac Studio software for vision.
system operation and setting. Type: S8JC-ZS series models list.
Meet the criteria: CE (EN50178).
Configuration: power ssupply with covver; DIN guide rail mounting WLD18-TH-N.
Input voltage: 350W.
Output voltage: 12VDC.
Output current: 29.0A.
Economic type power supply S8JC-Z additional models,
The new power S8JC-ZS has a CE certification mark to market.
Product features: reducce material costs;
Export machinery to be used to meet specific safety standards;
Through the DIN guide rail installation, significant savings in time WLD18-TH-N.
WLD18-TH-N Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WLD18-TH-N&select=5