SGE-225-0-3660N 02000C-02000C OMRON SGE-225-0-3660N 02000C-02000C

Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications OMRON SGE-225-0-3660N 02000C-02000C.
Long-distance model for up to 1,000 mm.Number of beams: 96 SGE-225-0-3660N 02000C-02000C
Protective height: 1950mm.
New Standard of Safety Light.
Curtain,Offering Both Robustness.
and Reliability.
Robust and compact.
New muting function to increase both productivity and safety OMRON SGE-225-0-3660N 02000C-02000C.
All models designed for global use. PNP/NPN selection by.
DIP switch.
Conforming to major international standards including .
Chinese standard GB 4584. A variety of high precision temperature sensor series.
On the basis of the previous M3 screw,
An additional rod like terminal corresponding to the reduced wiring working hours.
A temperature sensor is used as a thermal sensor for a thermostat OMRON SGE-225-0-3660N 02000C-02000C.
According to the temperature, place, the surrounding environment to be measured.
Products with various shapes, shapes, lengths and terminals . Appearance: Knob-type Selector Switch A22W,
LED voltage-reduction lighting (without Voltage Reduction Unit).
Number of notches: 2 notches.
Resetting method: Manual.
Output: SPST-NC.
Operating voltage: 200 VAC.
Illumination color: R (red); Y (yellow); G (green); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
Lever for easily mounting and removing the Switch Unit.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type,
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Release key type: Special release key.
Indicator: Green.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+2NC/1NO.
Conduit opening: M20.
Holding Force of 3,000 N.
Two ssafety circuits and two monitor coontacts provide an,
array of monitoring patterns SGE-225-0-3660N 02000C-02000C.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. .
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas SGE-225-0-3660N 02000C-02000C.
IP67 degree of protection.
SGE-225-0-3660N 02000C-02000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-0-3660N 02000C-02000C&select=5