SGE-225-2-0500N 02000C OMRON SGE-225-2-0500N 02000C

Size: Shielded, M8.
Sensing distance: 1.5 mm.
Model: Output configuration: NPN NO.
Highly Durable Proximity Sensor for.
Tough Environments.
Completely stainless-steel housing.
Aluminum chip immunity.
Embedding installation to metal (steel) fittings.
Chemical resistance certified by Ecolab Europe OMRON SGE-225-2-0500N 02000C.
Lineup includes pre-wire models and DC 3-wire NPN output,
models with fluororesin coating. Measurement range: 4 mm SGE-225-2-0500N 02000C
Resolution: 0.4 µm.
Operating force: Approx. 0.25 N.
Five Types of Sensor for Use in a Wide.
Range of Environments.
D5SN-S01/-S04/-S04-L Sensors have a compact and light,
weight design with an ultra-small diameter of 6 mm OMRON SGE-225-2-0500N 02000C.
The D5SN-S01 offers a high resolution of 0.1 µm .
D5SN-M05/-M10 Sensors have a robust construction and can,
withstand a horizontal load of 5 N.
D5SN-S01/-S04/-M05/-M10 Sensors ensure IP67 degree of,
protection.
All Sensors have an insulated design. Actuator: Roller lever (metal lever, resin roller).
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action) OMRON SGE-225-2-0500N 02000C.
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards .
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Power supply: AC power supply.
Output method: Transistor output sink type.
Inputs points: 18 points.
Outputs points: 12 points.Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 30 A at 180 to 400 VAC.
Rated input voltage: 12 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimuum design of heat sink .
MMounting possible via screws or via DIN track SGE-225-2-0500N 02000C.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply witth VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load SGE-225-2-0500N 02000C.
Certified by UL, CSA, and VDE (reinforced insulation).
SGE-225-2-0500N 02000C Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SGE-225-2-0500N 02000C&select=5