SLL-28H OMRON SLL-28H

Output: DPDT.
Lighting: Incandescent lamp.
Operating voltage: 5 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 OMRON SLL-28H. 5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads SLL-28H
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Input capacity: 16 points.
Rated current (ON current):
0.5 A/output, 4.0 A/common.
Internal I/O common: NPN.
Residual voltage: 1 OMRON SLL-28H. 2 V max.
(0.5 ADC, between each output,
terminal and the G terminal) .
Leakage current: 0.1 mA max.
ON delay: 0.5 ms max.
OFF delay: 1.5 ms max.
Number of circuits per common: 16 points/common.
Output indicators: LED display (yellow).
Isolation method: Photocoupler isolation.
I/O power supply method: Supply by I/O power supply.
Unit power supply current consumption: 90 mA max.
(for 20 OMRON SLL-28H. 4 to 26.4-VDC power supply voltage)
I/O power supply current con sumption: 5 mA max .
(for 20.4 to 26.4-VDC power supply voltage)
Weight: 180 g max.
Expansion functions: Enabled.
Output handling for communications errors:
Select either hold or clear.
Short-circuit protection function: No.
High-speed digital I/O terminal with the,
screw type terminal block for EtherCAT,
communications.
Detachable screw terminal block facilitates,
the maintenance.
The expansion unit can be connected.
(One expansion unit per one I/O terminal unit.)
Input/output point can be flexibly increased,
depending on the system.
Input response time can be switched for,
high-speed processing.
Selectable node address setting methods:
setting with rotary switch and with tool software.
When setting tthe nodes wiith rotary switch,
setting is easy and node identification becomes,
possible for maintenance SLL-28H. Appearance: Unshielded, M12.
Sensing distance: 12 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tigghttening strength SLL-28H. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models.
SLL-28H Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=SLL-28H&select=5