Slit width: Width 1 × 10 mm.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@. Sensor type: 2 wire DC type 1 - 4 / 3 - 4 non polarity.
Input points: 8.
The I/O sensor connector for centralized wiring,
And the province of the number of processes, strong environmental resistance as the goal,
The outer control relay box SGE-225-2-0890L 05000C.
Compact and strong centralized wiring trunk box conforming to IP67
SGE-225-2-0890L 05000C
The corresponding sensing I/O connector mode proximity switch, limit switch,
Photoelectric switch.
With the power to show LED, action shows LED.
The installation dimensions are the same and are not related to the number of input points,
Therefore, the addition of a simple exchange SGE-225-2-0890L 05000C.
A series of sensors with self diagnostic features are added to the product . Extremely small, with high sealing performance.
The cable leads to protection structure form, meet the JIS waterproof, and IEC IP67.
Using ambient temperature for -40 to +85 degree.
Using gold alloy cross bar contact and coil spring to realize long life and high reliability SGE-225-2-0890L 05000C. Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function) .
Operating voltage: 200/220 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Sensing method: Reflective type.
Sensing distance: 0 to 3 mm.
Output configuration: Turns ON when wafer carrier is present.
Cable length: 2 m.
Photomicrosensors for detecting,
wafer-carrier mounting.
The mounting position is set with a pedestal.
The contact surface with the wafer carrier uses a special chemical,
resistant fluororesin.
The unique optical system enables stable detection of almost all,
wafer-carriers.
Light modulation effectively reduces external light interference.
Utiliizes talc-free clean cables . Apppearance: Unshielded OMRON SGE-225-2-0890L 05000C.
Sensing surface: Top.
Sensing distance: 1.6 mm.
Model: Operation mode, NC.
Advanced Performance and Wide.
Range of Selections in a Super.
compact Size.
Only 5.5 × 5.5 mm with a built-in Ammpllifier OMRON SGE-225-2-0890L 05000C.
Maximum sensing distance: 2.5 mm. Stable detection even with,
workpiece fluctuations.
Response frequency: 1 kHz.
Low current consumption.
SGE-225-2-0890L 05000C Operation manual/Instructions/Model selection sample download link:
/searchDownload.html?Search=SGE-225-2-0890L 05000C&select=5