V400-W22-2M OMRON V400-W22-2M

Type: Reverse wiring.
Cable length L: 5.0 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Supply voltage: 12 VDC.
Control output: Contact output, DPDT (time-limit DPDT,
or time-limit SPDT + instantaneous SPDT) Changed using a switch OMRON V400-W22-2M.
Four-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications V400-W22-2M
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch.
Sequence checks are easily performed by setting an instanta,
neous output to 0 OMRON V400-W22-2M.
Start signal control for the H3DK-M. Appearance: R-shaped.
Sensing method: Through beam type (with slot) .
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation OMRON V400-W22-2M.
A built-in connector minimizes the shape and dimensional,
requirements .
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Number of beams: 60.
Protective height: 1,230mm.
Model: PNP.
Easy-to-use Safety Sensor Ideal for.
Simple On/Off Detection Applications.
Provides simple safety functions - saving TCO.
by reducing errors.
Simple wiring with only 4 wires.
Fast response time of 5 ms. Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
Relay contact: HH; PASS1c, H, L, LL: each 1a.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC/DC24V.
To suupport the sensoor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified V400-W22-2M.
Action determine the color, can switch the green / Red 2 kinds of cooloor display V400-W22-2M.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event input can be applied to a variety of measurement
V400-W22-2M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=V400-W22-2M&select=5