WS02-CFSC1-EV3-UP OMRON WS02-CFSC1-EV3-UP

Appearance: insert type.
Control supply voltage: AC100/110/120V.
Action elements: overload detection.
Action characteristic: anti time limit action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection OMRON WS02-CFSC1-EV3-UP.
A variety of models, such as anti time limit characteristics, lock time, instantaneous action, etc WS02-CFSC1-EV3-UP, are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT or the relay part is not needed, and the use is simple OMRON WS02-CFSC1-EV3-UP.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple . Type: General-purpose; 11-pin.
Space-saving Design Ideal for Control Panel.
Downsizing. Easy Maintenance.
Compact: 49.4 × 38 × 84 mm (H×W×D).
Easy identification of operating status with LED operation indicator.
Independent DPDT contacts on 11-Pin Models OMRON WS02-CFSC1-EV3-UP.
CE marking and UL/CSA compliance. Type: 3 wire, shielded.
Shape: 4 .
Detection range: 0.8mm.
Connection mode: lead type (2m).
Wire specification: PVC (oil resistant).
Action mode NC.
PNP output.
Proximity sensors for preferred world top performance and quality.
Standard type of magnetic metal detection.
Rich variety.
According to the conditions to choose the most suitable models.
Anti interference function of different frequency range models.
Has excellent environmental performance.
Standard wire material for oil resistant PVC.
Test face using cutting oil material.
Standard wire jacket. Unit type: CJ1 Basic I/O Units.
name: B7A Interface Units.
Specifications: I/O points, 64 outputs;
External connection, Removable terminal block.
No. of words allocated: 4 words.
Current consumption: 5V, 0.07A; 24V, --.
Standards: UCC1, CE .
It transmitts 16 points of I/O signals per,
word with a pair of cables WS02-CFSC1-EV3-UP.
Easy and minimized wiring effort,
The B7A Interface Unit and B7A Link Terminal,
can be used in the same way as a standard,
Basic I/O Unit and I/O Terminal withoutt,
any need to worry about communications WS02-CFSC1-EV3-UP.
This characteristic reduces the wiring,
when using more than one relatively remote,
sensor or actuator.

WS02-CFSC1-EV3-UP Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WS02-CFSC1-EV3-UP&select=5