WT30-AT002 OMRON WT30-AT002

Measuring current: 10 to 100 A AC, 20 to 200 A (See note.).
Supply voltage: 100-115 VAC.
Ideal for current monitoring for,
industrial facilities and equipment.
Monitor for overcurrents or undercurrents.
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately OMRON WT30-AT002.
One SPDT output relay, 6 A at 250 VAC (resistive load).
Output relay can be switched between normally open and,
normally closed WT30-AT002
Process control signal (4 to 20 mA) and commercial CT input,
(0 to 1 A or 0 to 5 A) supported.
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply OMRON WT30-AT002. Element type: K (CA).
Terminal type: Exposed-terminal Models .
Protective tubing diameter D (mm): 12 dia.
Protective tubing length L: 35 cm.
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers OMRON WT30-AT002.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal . Contact type: Standard load (250 VAC, 3 A; 30 VDC, 4 A).
Operation: Alternate operation (Self-holding).
Case color: Light gray.
Output: SPDT.
Lighting: Incandescent lamp; 14 VDC/VAC.
Pushbutton color symbol: R.O.G.W.
Large Square-bodied Lighted.
Pushbutton Switches.
Excellent operating sensitivity.
Excellent illumination with even surface brightness.
Three-color models (green, orange, red; chameleon lighting).
included in lineup. Detection methods: the firing pattern.
Detection range: 2m.
Purpose: small,
Small thin space probe;
Interference prevention function with close installationCable /G79-Y_C with loose wire connecting terminal.
L size: 1000mm.
Cable and loose wire cable with loose wwire pressing cconnecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable WT30-AT002. Sensor method: Throughbeam.
Case material: Polybutylene terephthalate.
material Sheath: PVC.
Connection method: Pre-wired cable (2 m).
Sensing ddisstance: 0 WT30-AT002. 2 to 3 m.
Output: PNP.
Detects Intrusions into Hazardous.
Areas with a Single Beam and.
Complies with International Safety.
Standards.
WT30-AT002 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=WT30-AT002&select=5