XG8V-1031 OMRON XG8V-1031

Provincial installation space, vertical 4 point output terminal relay.
28 x 90 x wide high deep into the dimension of the 45mm space saving.
Equipped with built-in G6D relay type and non contact G3DZ power FET MOS relay type, complete varieties.
The terminal is IN/OUT separate structure, so it is convenient for wiring OMRON XG8V-1031.
LED with action indication.
Diode for internal coil surge absorption.
Using a special socket, the relay can be replaced conveniently XG8V-1031
DIN guide rail installation, screw mounting common.
Disassembly tool with relay. Actuator: Adjustable roller lever.
Airtight.
Select the Best Two-circuit Switch for the,
Operating Environment and Application,
from a Wide Range of Models,
A wide selection of models is available, including General-purpose,
Environment-resistant, and Spatter prevention Switches OMRON XG8V-1031.
Standard-feature gold-clad crossbar contacts provide high reliability.
Applicable to either standard loads or microloads.
Switches with Lever Actuators provide 90° overtravel,
one-side operation, and four-direction head mounting OMRON XG8V-1031.
Approved standards: EN/IEC, UL, cUL, and CCC .
Contact your OMRON representative for information on approved models. Conduit: JIS B 0202 G½.
Applicable cable: Cabtire cable.
Inner diameter (D)of seal rubber: 10.6 mm.
External diameter of cable: Min, 8.5 mm; Max, 10.5 mm.
Applicable model: WL-N, WL, D4A-@N, D4B-@N, ZE, ZV, ZV2, XE, XV, XV2.
Connectors (SC Series).
Cabtire cables and flexible tubes with various diameters are used to,
connect machine tools and controllers with Limit Switches. To ensure,
the watertightness of the edges of the conduits, use an SC Connector,
that is suitable for the external diameter of cable and model of Limit Switch. Input/Output: Outputs.
Internal I/O circuit common: PNP (+ common).
I/O points: 8 points.
I/O connection method: Sensor connector.
Rated voltage for I/O power supply: 24 VDC.
Eight Waterproof Terminal Models.
Emphasizing Cost Efficiency.
Reduced Labor.
Connection using connectors reduces the lead time,
required for installation. No tools are required for,
connection to a variety of devices.
Reduced Wiring.
Signal line wiring has been reduced so that the,
Terminal can be mounted closer to sensors and,
other devices.
Relay Box not Required.
Environment-resistant, dust-tigght, drip-prooof,
construction (IP67) enables direct on-site,
mounting XG8V-1031.
Easier Maintenance.
Significant reductions not only in setup time but also,
maintenance time.
Reduced Space, Improved Operability,
Compact design (160 x 54 mm (W x H)) (88-ppoint models) XG8V-1031.
Settings and connections can be performed using,
the switch and connectors on the front side of the Terminal.
System Configuration.
XG8V-1031 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=XG8V-1031&select=5