XS2F-D422-JA0-A OMRON XS2F-D422-JA0-A

Model: C200HW-ME04K.
Capacity: 4K words.Sensor-less Monitoring of Standstill for,
Machines with Long Inertia.
Standstill is monitored by the motor''s back electromotive force (BEMF) signal.
Features a "Standard Configuration", allowing immediate use,
without sensitivity adjustment.
"User Configuration" also available for fine-tuning of sensitivity OMRON XS2F-D422-JA0-A.
Detailed LED indications enable easy fault diagnosis XS2F-D422-JA0-A
Safety Category 4 (EN954-1), PLe(ISO13849-1),
SIL 3 (IEC/EN 62061) certified. Detected voltage: AC.
Compact, Economical Plug-in Type Voltage.
Sensing Relay.
DPDT output contacts expand the application of the Sensor to,
wide-ranging fields including control, alarms, and indication OMRON XS2F-D422-JA0-A.
Voltage control is possible in the same easy manner as electro,
magnetic relays, as the output relay of the sensor can be driven,
directly with a detection signal .
Wide voltage setting range with fine setting capability. Item: Station.
Easy temperature and humidity control with an SD Card. The communication unit can be connected to the CompoNet network with a multi function small transducer MX2 OMRON XS2F-D422-JA0-A.
Power supply: through the inverter power supply.
Protection structure: IP20.
From station type: word from station unit (mixed type).
Authentication: Conformance testing via CompoNet. Cable length L: A, 2.0 m; B, 1.75 m.
Connect Connector-Terminal,
Block Conversion Units (XW2@) to,
I/O Units for Programmable,
Controllers with one touch. Name: Terminal Unit(Includes bus system without backplane.).
No. of control points: 18 (See note 1.).
Functions: Not equipped with communications terminals for power supply,
communications, and setting devices.
New DIN Track Mounting Temperature.
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself caan be replaced withoout,
changing terminal wiring XS2F-D422-JA0-A.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communicatiionns wiring not required between,
Units when mounted side-by-side XS2F-D422-JA0-A.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance.
XS2F-D422-JA0-A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=XS2F-D422-JA0-A&select=5