XW2Z-050J-A30 OMRON XW2Z-050J-A30

Operation indicator: With operating indication; Standard load.
Ratings: 4 A at 30 VDC.
Actuator: Roller lever.
Cable length : 3m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON XW2Z-050J-A30. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material XW2Z-050J-A30
Cable lengths of 3 and 5 m available on standard models OMRON XW2Z-050J-A30.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.) Appearance: Round/Full-guard type LED lighting,
(without Voltage Reduction Unit) A22L-G OMRON XW2Z-050J-A30.
Output: SPST-NO + SPST-NC.
Lighting: LED .
Operating voltage: 24 VAC/VDC.
Operation: Momentary operation (self-resetting).
Illumination color: R (red); Y (yellow); G (green); W (white); A (blue).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted models). Power supply voltage: DC100V.
Note: operation with output contacts.
Power supply unit.
The power supply of the CPU rack is supplied by the power supply unit.
The following power units are available for selection.
C200HW-PA204 (voltage: AC100-120V/AC200-240V)
C200HW-PA204S (voltage: AC100-120V/AC200-240V)
C200HW-PA204R (voltage: AC100-120V/AC200-240V)
C200HW-PD024 (voltage: DC24V)
In the past, PC connected to a meeasurement equipment or components must be given to the ASCII unit or BASIC unit to write a communication program XW2Z-050J-A30.
Now, PC C200HX/HG/HE is installed on the communication protocol macro function,
Can be configured to these communicaatiions procedures through the PMCR instruction to the ladder program,
With this function system can be easily connected with a wide range of components XW2Z-050J-A30.
XW2Z-050J-A30 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=XW2Z-050J-A30&select=5