G7J-3A1B-BZ DC6 OMRON G7J-3A1B-BZ DC6

Output: SPDT.
Lighting: LED (with built-in reduced-voltage lighting function).
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia OMRON G7J-3A1B-BZ DC6. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch G7J-3A1B-BZ DC6
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Isolation: Photo-voltage coupler.
Zero cross function: No.
Indicator: Yes OMRON G7J-3A1B-BZ DC6.
Rated output load: 0.5 A at 24 to 240 VAC, 0.5 A at 24 to 110 VDC.
Rated input voltage: 24 VDC .
100-A-max. Leakage Current, No Bleeder.
Resistor Required.
1 mA to 500 mA micro-load switching.
Switch to both AC and DC with no polarity.
Switch for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC.
Switch full- and half-wave rectifier AC loads.
Same sizes and terminal arrangements as OMRON Power,
Relay MY Series OMRON G7J-3A1B-BZ DC6.
Operating indicator provided.
Switch MY Series (without bleeder resistor) .
Superior surge absorption with a built-in varistor.
Optimum SSR to control minute load, valves, and solenoids. Appearance: M5.
Sensing distance: 3 mm.
Connecting method: M8 Connector Models.
Cable specifications: --.
Operation mode: Nc.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available.
High-speed response frequency stably detects moving,
objects: 5 kHz max.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube against wire,
breakage is available (M4, M5 only).
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables. Appearance: Integrated type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 40mm.
Resolution: 10µm.
Output type: PNP.
Measurable at any position.
The usual limitations, such as the ''measurementt,
area being confiined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome G7J-3A1B-BZ DC6. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr wwhichever way it is inserted G7J-3A1B-BZ DC6.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.
G7J-3A1B-BZ DC6 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=G7J-3A1B-BZ DC6&select=5