MM4XKP-JD DC100/110 OMRON MM4XKP-JD DC100/110

Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Plastic rod.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON MM4XKP-JD DC100/110. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material MM4XKP-JD DC100/110
Cable lengths of 3 and 5 m available on standard models OMRON MM4XKP-JD DC100/110.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Element type: K (CA).
Terminal type: Exposed-terminal Models OMRON MM4XKP-JD DC100/110.
Protective tubing diameter D (mm): 4.8 dia.
Protective tubing length L: 75 cm .
A Wide Variety of High-precision.
Temperature Sensors.
Previous models with M3 screw connections have been joined,
by new models with ferrules to help reduce wiring work.
Ideal for the thermal input devices of Temperature Controllers.
Select from a wide variety of Temperature Sensors according,
to the temperature to be measured, location, and environment,
and also according to the type and shape of the terminal. Optical system: diffuse type.
Detection distance: 130 positive and negative 15mm.
Beam shape: linear beam.
Beam diameter: 600mm * 70 M.
Resolution: 3 m.
Cable length: 0.5m. Type: rectangle.
Screen mode: 2 short axis segmentation.
Light way: LED.
Power supply voltage: 28V
Operating part left color: white.
Operating part right color: white.
Square 40mm body of the indicator light series.
The same type as the A3S series button switch.
Easy to install from the front panel and no tools to carry out the lamp replacement. Appearance: insert type.
Control supply voltage: DC48V.
Action elements: overload detection.
Action characteristic: lock, instant action type.
Especially suitable for single phase motor over current protection.
Can be used for motor overload protection, common single-phase circuit of the AC current detection.
A variety of models, such as anti time limit characteeristics, lock time, insstantaneous action, etc MM4XKP-JD DC100/110., are provided,
The product is rich in variety, and can be effectively protected, detected and controlled according to the actual situation.
When the current is large, the input resistance of the CT orr tthe relay part is not needed, and the use is simple MM4XKP-JD DC100/110.
Because it is a plug-in, installation, disassembly, wiring and other operations are very simple.
MM4XKP-JD DC100/110 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MM4XKP-JD DC100/110&select=5