MY4N-D2 DC48 OMRON MY4N-D2 DC48

Control output: Contact output: DPDT (time-limit output).
Supply voltage: 220 VAC (50/60 Hz).
11-pin models.
Solid-state Timer with Valuable Multiple-time.
Ranges and Multiple-operating Modes.
Handles a wide range of applications through eight operating modes.
With H3BA-N8H models, the output type can be switched OMRON MY4N-D2 DC48.
between time-limit DPDT and time-limit SPDT + instantaneous.
SPDT using a selector MY4N-D2 DC48
Setting rings (order separately) to enable consistent settings.
and to limit the setting range.
Panel Covers (order separately) to enable various panel.
designs.
CE marking.
UL, CSA and CCC certification, conforms to LR OMRON MY4N-D2 DC48. Size: 96 × 96 mm.
Control type: Basic control (1 loop).
Control mode: Single-loop standard control Single-loop heating and cooling control .
Outputs(control/transfer): 2 points: Current and Current.
Optional functions: Auxiliary outputs (SUB), 4;
Event inputs, 2; Serial communications, RS-485.
E5AR Digital Controllers offer high speed,
high precision, and multiple I/O and use a 5-digit,
3-row LCD display for high visual clarity OMRON MY4N-D2 DC48.
A short sampling period of 50 ms enables use in applications,
requiring high-speed response .
PV, SP, and MV data is displayed simultaneously in a 3-row,
negative LCD display with a backlight.
Multiloop control, cascade control, and proportional control are,
possible with a single Controller.
When using models with CompoWay/F communications, initial,
settings can be downloaded and settings can be masked using,
Support Software (CX-Thermo version 4.0 or higher).
Equipped with calculation functions as a standard (e.g., square,
root calculation and broken-line approximation).
DeviceNet Communications.
Data setting and monitoring can be performed without special programming. Type of drive rod: one-way action roller type (vertical motion).
Conduit size: single catheter type, M20.
Built in switcch structure: sloow motion (1NC) MY4N-D2 DC48.
Safety limit switch in accordance with global standard EN 50047.
The contact constitutes a complete variety, there is a single point of specification (1NC) and double contact specifications (1NC/1NO, 2NC).
Forcedd oopen action structure MY4N-D2 DC48.
The slow moving contact structure is adopted to ensure that the contact distance is 4mm.
Elevator and escalator can be used.
MY4N-D2 DC48 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MY4N-D2 DC48&select=5