NT30C-ST141B-E OMRON NT30C-ST141B-E

Time specification: Instantaneous type.
Current setting range: 2 to 8 A.
Operating voltage: 100/110/120 VAC.
Resetting method: Manual.
Solid-state Relay Enables Choice of Three.
Operating Functions (Overcurrent, Open,
phase, and Reverse-phase).
Protects 3-phase induction motors and their loads from damage OMRON NT30C-ST141B-E.
Selection and combination of operating functions from overcur,
rent, open-phase, and reverse-phase NT30C-ST141B-E
Circuit and output relay operation can be checked by just operat,
ing the test button.
The set time value can be checked easily because operation time,
is indicated from the start of operation.
Space-saving, integrated construction OMRON NT30C-ST141B-E.
Note: If the K2CM is used with an inverter, the operating conditions will,
depend on the load wiring length, inverter carrier frequency, basic,
frequency, and load conditions . Error will occur in the operating,
values of the overload elements. It is recommended to test operation,
before using the K2CM. Output: DPDT.
Lighting: Non-lighted.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2 OMRON NT30C-ST141B-E.
Item: Momentary operation (Self-resetting).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Count input: No-voltage input.
Display: 7-segment LCD.
Total counter: Max. counting speed; 1 kHz.
Dedicated for use on PCB.
Total Counters and Time Counter available. Field of view: Standard View.
Number of pixels: 760,000 pixels.
Color: NPN.
Field of view/Installation distance: Refer to figure 6 on p.20.
Inspection capabilities, camera options,
and communication options -- this powerful,
heavy weight has it all.
This Vision Sensor provides all of the best-selling,
features found in high-end models without the,
need as in vision system for a separate controller.
This new Smartt Camera was designned to attract,
potential customers to try the FQ2 Series NT30C-ST141B-E. Appearance: Rectangular (M16-A).
Lighting: LED without Voltage Reduction Unit, 12 VAC/VDC.
Degree of protection: IP65 oil-resistant.
Display color symbol: R: red; Y: yyelllow; G: green; A: blue;
W: white; PY: pure yellow; PW: pure white NT30C-ST141B-E.
Cylindrical 16-dia. Indicator.
Same basic design as the A16 Pushbutton Switch.
NT30C-ST141B-E Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=NT30C-ST141B-E&select=5