OMRON LY2-CR AC200/220

Shape of box: Without flange.
Actuator: Bevel plunger.
Conduit: Two on the side.
A New Monoblock Multiple Limit Switch.
Incorporating a Head Box with a Tough.
Head and Ensuring High Sealing.
Performance and a Mechanical.
Durability of 5,000,000 Operations.
Used for the sequential control of a variety of engineering OMRON .
machines and belt conveyor lines.
Built-in oil filter shuts out oil and water LY2-CR AC200/220
Approved by EN, IEC (Ground terminal models only.) and,
CCC (Chinese standard). Ask your OMRON representative,
for information on approved models.
Ground terminal models bear the CE mark. Release Key Type: Special (resin) OMRON .
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange) .
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock OMRON .
Safety-door Switch.
.
Wiring time is reduced with two types of wiring .
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors. Sensing method: Through-beam.
Sensing distance: 500 mm.
Output configuration: NPN open collector NC (normally open).
Compact, Through-beam, Ultrasonic.
Sensor.
Provides stable detection of transparent films, transparent.
bottles, PET bottles, and other similar workpieces.
Compact design with built-in amplifier allows easy mounting.
on small conveyor lines.
Detects as far as 500 mm away.
Equipped with stability indicator. Servo trunk unit.
Product Name: servo relay unit.
Application unit: FQM1-MMA22/MMP22.
Specifications: servo drive G5/G series /SMARTSTEP2.
Axis number: biaxial.
The connector and terminal of the relay unit are integrated into a whole,
Save the wiring servo drive and position control unit.
Seervo driver and control siggnal of position control unit,
Simple wiring on terminal stage OMRON LY2-CR AC200/220.
The connector without soldering, with only a screwdriver can wiring.
Dedicated connection cable between units.
DIN guide rail installation, the rapid installaatiion, screw installation of two methods OMRON LY2-CR AC200/220.
M3.0 thread terminals attached with a special plate signal.
The terminal can be confirmed by the signal name.

LY2-CR AC200/220 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=LY2-CR AC200/220&select=5