OMRON K3NH-TA1A-T1 Price K3NH-TA1A-T1

E3JK-R2S3 detection method: Regression reflection type with M.S.R. function,
Connection mode: lead wire,
Detection range: 2.5m.
Output state: when the light into the ON; light shading ON.
Output: DC no contact,
2 types of cost reductionPower supply: DC power supply.
Output method: Transistor output source type K3NH-TA1A-T1 Price.
Inputs points: 18 points.
Outputs points: 12 points.Output: DPDT.
Lighting: LED (with built-in reduced-voltage lighting function) K3NH-TA1A-T1
Operating voltage: 100/110 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; PW: pure white; B: black *2.
Item: Alternate operation (Self-holding) K3NH-TA1A-T1 Price.
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28 . 5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Ratings: 0.1 A at 125 VAC.
Cable: VCTF oil-resistant cable*.
Actuator: Pin plunger.
Cable length : 3m K3NH-TA1A-T1 Price.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard) .
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Bar code reader
Read range: 655mm .
Interface: RS-2322C OMRON K3NH-TA1A-T1.
Small, high reliability and low cost portable contact type bar code reader. Number of notches: 2 notches.
Output: DPDT.
Reset method: Manual.
Key release position: Right.
Separate Construction with Cylindrical.
16-dia. . Body OMRON K3NH-TA1A-T1.
Short mounting depth, less than 28.5 mm below panel.
Wide range of switching capacity from standard to microload.
Oil-resistant IP65 models.
K3NH-TA1A-T1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=K3NH-TA1A-T1&select=5