OMRON MY4 DC62.5 MY4 DC62.5

Number of outputs: 16 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Shared.Number of beams: 29.
Protective height: 720mm.
Model: PNP output.
Basic Type with a combination of.
performance and functionality.
Up to three sets of series-connected sensors.
The muting function is enabled simply with Muting Key Cap OMRON MY4 DC62.5.
Comes standard with interlock and auxiliary output functions MY4 DC62.5 This series contains optimal control case of the new thin,
Light connector terminal box, has better,
Environmental resistance and centralized management of I/O sensor connector,
Therefore, less artificial.
Wear resistant thin, protection grade can reach IP67 OMRON MY4 DC62.5.
Suitable for photoelectric sensor,
Proximity sensor and sensor with I/O connector (M12) limit switch .
In addition, due to the increase of the rated current, the ground terminal is increased,
So it can support and connect the valve solenoid.
Contains power and action indicator light.
No matter how many ports are used, the installation method is used,
To ensure that the system can be easily expanded OMRON MY4 DC62.5. Specifications: Outputs;
PNP (+ common); 32 points .
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Appearance: Round/Half-guard type A22-H.
Output: SPST-NO + SPST-NO.
Operation: Alternate operation (self-holding).
Illumination color: R (red); Y (yellow); G (green);
W (white); A (blue); B (black).
Install in 22-dia. or 25-dia. Panel Cutout.
(When Using a Ring).
Lever for easily mounting and removing the Switch Unit.
Increase wiring efficiency with three-row mounting of Switch Blocks.
Finger protection mechanism on Switch Unit provided as a standard feature.
Use 25-dia. ring to install in 25-dia. panel cutouts.
Mounted using either open-type (fork-type) or closed-type.
(round-type) crimp terminals.
IP65 oil resistance (non-lighted models).
IP65 (lighted modelss) . Sensing meethod: Convergent reflective MY4 DC62.5.
Connection method: Pre-wired (2 m).
Sensing distance : 20 to 35 mm .
function Timer: Without .
Model: NPN output.
Reliable Detection Unaffected by PCB.
Holes or Notches.
High-limit E3S-LS3@ is suittabble for incorporation in devices MY4 DC62.5.
Wide-range E3S-LS3@W is ideal for detecting tall components,
mounted on boards.
Timer function models available.
MY4 DC62.5 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MY4 DC62.5&select=5