Sale MKS1XT-10 DC48 OMRON MKS1XT-10 DC48

Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units.
Specifications; No. of loops: 4 loops;
Temperature sensor inputs: Thermocouple,
input (R, S, K, J, T, B, L);
Control outputs: Open collector NPN outputs (pulses).
No. of unit numbers allocated: 2.
Current consumption: 5V, 0 MKS1XT-10 DC48. 25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers MKS1XT-10 DC48
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output. Wire length: 1m.
Core line type: K (CA) MKS1XT-10 DC48.
Temperature sensing part of temperature controller.
In the application field of packaging molding machine is widely used,
Further strengthened the high cost models .
Easy to install / replace the structure.
With springs, you can use the active part (E52Z-CA1D-40). E32-TC200B4R type: standard type; soft (new standard),
Specialty: M4 screw with casing,
Shape / detection distance (mm): 700; 530; 350 (140),
Standard test object
(minimum test object) (mm) 1: 1 (0 MKS1XT-10 DC48. 005),
Fiber element for meeting diversified needsRatings: Standard load; 4 A at 30 VDC .
Cable: VCTF cable *2.
Actuator: Pin plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Application: General applications for purified water,
For 4-pole electrode (2-wire).
Separate Electrode Holders for Water.
Supply and Drainage Control in Buildings.
Small, Lightwweight Electrode Holders for,
Use as Built-in Components OMRON MKS1XT-10 DC48.
The PS-@S(R) are separate Electrode Holders that allow the,
Electrodes to be withdrawn easily for inspection.
The PS-@S(R) come in 3, 4, or 5 pole models for supply and,
drainage of tapp wwater in buildings OMRON MKS1XT-10 DC48.
PS-31 is a small and light-weight Electrode Holder that is,
suitable for installation in limited space and built-in components.
MKS1XT-10 DC48 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=MKS1XT-10 DC48&select=5