A165W-T2MR-24D-1 OMRON A165W-T2MR-24D-1

Actuator: Roller plunger.
Conduit size: 1-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available OMRON A165W-T2MR-24D-1. )
M12-connector models are also available, saving on labor and,
simplifying replacement A165W-T2MR-24D-1
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only) OMRON A165W-T2MR-24D-1.
Certified standards: UL, EN (TÜV), and CCC. Name: Temperature Controller (See note 1.) .
Power supply: 24 VDC.
No. of control points: 2.
Control output: Transistor output.
Auxiliary output: Transistor output: 2 pts (sinking).
Functions: Heater burnout alarm (See note 3.), Heating or heat/cool,
control is selectable (See note 4.)Event input: 1 point per Unit.
Communications functions: RS-485 OMRON A165W-T2MR-24D-1.
Input type (See note 5.): Platinum resistance thermometer.
New DIN Track Mounting Temperature .
Controller.
Two channels of temperature control available despite width of,
only 22.5 mm.
The Temperature Controller itself can be replaced without,
changing terminal wiring.
Use in combination with a compact Setting Display Unit to,
reduce communications programming requirements.
Front-panel LED indicators for easy operation monitoring.
Power supply and communications wiring not required between,
Units when mounted side-by-side.
CompoWay/F communications protocol supported.
UL, CSA, and CE Marking compliance. Software for setting parameters.
A software can correspond to a variety of models
Can use the computer to compile, edit, transfer all parameters.
Reducing the time when setting the same parameters to multiple devices,
Can monitor the content of the set, the current value.
The parameters of the system can be output in the form of CSV and HTML. Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units.
Specifications: I/O points, 8 outputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 VV, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point A165W-T2MR-24D-1.
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.18A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Annallog Input Units for converting,
analog input signals into binary data A165W-T2MR-24D-1.
Analog Output Units for converting ,
binary data into analog output signals.
A165W-T2MR-24D-1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A165W-T2MR-24D-1&select=5