A22L-TW-T2-11A OMRON A22L-TW-T2-11A

Rated input voltage: 3-phase 3-wire mode, 380, 400, 415, or 480 VAC .
Ideal for Monitoring 3-phase Power Supplies.
for Industrial Facilities and Equipment.
Greater resistance to inverter noise.
Monitor undervoltages, overvoltages, voltage asymmetry, phase,
sequence, and phase loss in three-phase three-wire circuits with one unit OMRON A22L-TW-T2-11A.
One SPDT output relay, 5 A at 250 VAC (resistive load).
World-wide power specifications supported by one unit A22L-TW-T2-11A
(Set with a rotary switch.).
Relay status can be monitored using LED indicator. Release key type: Trapped key *1.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release OMRON A22L-TW-T2-11A.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+3NC .
Conduit opening: M20.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas OMRON A22L-TW-T2-11A.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas .
IP67 degree of protection. Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: DPST-NO.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives. Output: DPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 5 VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Alternate operation (Self-holding).
Separate Construction with.
Cylindrical 16-dia. Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Ontology: DeviceNet type.
Size: 48 x 96mm.
Type: 4 input type.
Control mode: 4 channel standard control /2 channel heating and cooling control.
Output (control / transfer) points: 4 points (4 points).
Output (SUB) points: 2 points.
Event input points: -.
High speed, high precision and multiple input and output universal digital regulator,
Liquid crystal display device with high visibility 5 bit and 3 line.
The high speed sampling period is suitable for the operation of high speed response.
With a backlight liquid crystal dissplay and the 3 display, can display the current value, the target value, the amount of operation A22L-TW-T2-11A.
1 digital controller can be multi point control / series control / proportion control.
Standard is equipped with a variety of compuutiing functions A22L-TW-T2-11A.
Equipped with DeviceNet communication function.
Data setting and data monitoring can be performed by means of a communication program.
A22L-TW-T2-11A Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22L-TW-T2-11A&select=5