A22W-2AA-24A-02 OMRON A22W-2AA-24A-02

Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Roller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models OMRON A22W-2AA-24A-02. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material A22W-2AA-24A-02
Cable lengths of 3 and 5 m available on standard models OMRON A22W-2AA-24A-02.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers .
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Sensing method: Through-beam type.
Output type: NPN output OMRON A22W-2AA-24A-02.
Output configuration: Dark-ON or Light-ON (selectable).
Cable length: 1 m .
Liquid Level Photomicrosensor with,
operation mode and sensitivity selectors,
for easy application.
Operation mode selector allows modes to be switched easily.
Sensitivity selector is suitable for any 6- to 13-mm-diameter transparent or,
semi-transparent pipe with a wall thickness of 1 mm.
Uses a clean (with no powder parting agent) cable.
Operating voltage range: 12 to 24 VDC. Type: Long-distance (for 4 km); 11-pin.
Space-saving Design Ideal for Control Panel.
Downsizing. Easy Maintenance.
Compact: 49.4 × 38 × 84 mm (H×W×D).
Easy identification of operating status with LED operation indicator.
Independent DPDT contacts on 11-Pin Models.
CE marking and UL/CSA compliance. Type: Board I/O.
Terminal Block: Terminal block with M3.5 screws.
Connector: Muulti-pole, Square Coonnector Plugs *3 A22W-2AA-24A-02.
No. of poles: 40.
Simplifies Connector and terminal,
block replacement, and requires less,
in-panel wiring.
Mount to DIN Track or via screws.
MIL Flat Cable Connectors and Multi-pole, Square,
Connectors arre standard A22W-2AA-24A-02.
Terminal blocks available with either M3 or M3.5 screws.
Connecting Cables for Programmable Controllers,
available (sold separately).
A22W-2AA-24A-02 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22W-2AA-24A-02&select=5