OMRON A165L-TRM-5D-1 Price A165L-TRM-5D-1

Actuator: Plunger.
Conduit openings: G1/2 (PF1/2).
1NC/1NO (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts A165L-TRM-5D-1 Price.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever A165L-TRM-5D-1
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion A165L-TRM-5D-1 Price.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13) .
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Type: 1a1b welding terminal.
Shape: rectangle.
Type: General load.
Action: instantaneous action (auto recovery).
With lamp: incandescent lamp.
Using voltage: AC/DC12V A165L-TRM-5D-1 Price.
Operation Department color: green.
20mm long, with 12 round series
High brightness all one side light .
Because it is round, so easy to punch.
Miniaturization, operation feel good. Control output 1: Voltage output.
Control output 2: Relay output.
Auxiliary output: Two.
Communications: RS-485.
Heater burnout: One.
Event inputs: Two.
Power supply voltage: 24 VAC/VDC.
Large White PV Display That’s Easier to Read.
Easy to Use, from Model Selection to Setup and Operation.
A Complete Range of I/O Capacities,
Functions, and Performance.
Handles More Applications.
The white PV display with a height of 15.2 mm improves visibility.
High-speed sampling at 50 ms.
Short body with depth of only 60 mm.
Easy connections to a PLC with programless communications.
Use component communications to link Temmperature,
Controllers tto each other OMRON A165L-TRM-5D-1. Mounting method.
Hook the upper protruding portion,
of the Slit to the upper indented,
mounting portion of the Sensor,
and adjust the position of the Slit,
so that the Slit will be in parallel to,
the leenss side of the Sensor OMRON A165L-TRM-5D-1.
Press the lower protruding portion,
of the Slit onto the indented,
mounting portion of the Sensor,
until the Slit snaps in.
A165L-TRM-5D-1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A165L-TRM-5D-1&select=5