OMRON A165L-TWA-24D-1 A165L-TWA-24D-1

Power ratings: 15 W.
Input voltage: 100 to 240 VAC(allowable range: 85 to 264 VAC or 80 to 370 VDC*3).
Output voltage: 12 V.
Output current: 1.2 A.
UL Class 2 Output standards: Yes.
Model number(screw terminal block).
60/90/120/180/240/480-W Models.
New Models with Indication.
Monitor and Simple Functions for OMRON A165L-TWA-24D-1.
Easy System Commissioning.
New 90-W models with indication monitor that.
conform to UL Class 2 Output standards A165L-TWA-24D-1
New models with screwless terminal blocks and,
indication monitor.
Status displayed on 3-digit, 7-segment display.
Safety standards: UL 508/60950-1,
CSA C22.2 No. 107.1/60950-1,
EN 50178 (= VDE 0160), EN 60950-1 (= VDE 0805 Teil 1) OMRON A165L-TWA-24D-1.
Input conditions: DC input is also possible from 80 to 370 VDC .
(Not compliant with EC Directives and other safety standards.) Output: SPDT.
Lighting: LED without Voltage Reduction Unit.
Operating voltage: 12 VAC/VDC.
Pushbutton colorsymbol: R: red, Y: yellow; PY: pure yellow
G: green, A: blue; W: white; PW: pure white.
Item: Momentary operation (Self-resetting) OMRON A165L-TWA-24D-1.
Separate Construction with.
Cylindrical 16-dia . Body.
Miniature design of 28.5 mm, the smallest class in the industry.
Detachable Switch.
The same contacts can be used for both standard loads and microloads.
Easy-to-wire terminal arrangement.
Certified for EN 60947-5-1. Appearance: Shielded, M30.
Sensing distance: 15 mm.
Output configuration: DC 2-wire (no polarity) (3)-(4) pin arrangement.
Operation mode: NO.
Spatter-resistant Fluororesin,
coated Proximity Sensor.
Superior spatter resistance.
Long Sensing-distance Models added for sensing,
distances up to 15 mm.
Pre-wired Smartclick Connector Models are also available. Appearance: Shielded, M12.
Sensing distance: 4 mm.
Model: Output configuration: NPN NC.
Long-distance Proximity Sensor.
Long-distance detection at up to 30 mm enables secure mounting,
with reduced problems due to workpiece collisions.
No polarity for easy wiring with DC 2-wire models.
Cable protector provided as a standard feature. Input type: DC current input.
Output type: transistor; -; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC100 ~ 240V.
96 (W) * 48 (H * 95mm) some models are not equuipped with depth .
The most suitable voltage and current signal simulation, measurement and display, identification of the panel table A165L-TWA-24D-1.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressuuree gauge for monitoring the operation trend A165L-TWA-24D-1.
External event input can be applied to a variety of measurement and identification situations.
DeviceNet
A165L-TWA-24D-1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A165L-TWA-24D-1&select=5