OMRON A22L-CR-24A-20M Price A22L-CR-24A-20M

Measuring voltage: 1 to 10 V AC/DC, 3 to 30 V AC/DC, 15 to 150 V AC/DC.
Supply voltage: 100-115 VAC.
Ideal for voltage monitoring for industrial.
facilities and equipment.
Monitor for overvoltages and undervoltages simultaneously.
Separate settings and outputs supported for overvoltages and,
undervoltages A22L-CR-24A-20M Price.
Manual resetting and automatically resetting supported by one Relay.
Pre-alarm Monitoring Mode A22L-CR-24A-20M
Two SPDT output relays, 6 A at 250 VAC (resistive load).
Process control signal (0 to 10 V) and current splitter input supported.
Output status can be monitored using LED indicator.
Input frequency of 40 to 500 Hz supported A22L-CR-24A-20M Price.
Inputs are isolated from the power supply. Ratings: Standard load; 5 A at 125 VAC .
Cable: VCTF oil-resistant cable *1.
Actuator: Roller lever, high sensitivity.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models A22L-CR-24A-20M Price. )
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material .
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New cennter roller lever models tthat enable ganged mounting OMRON A22L-CR-24A-20M.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(sstaandard indicator is lit when Switch is not operating) OMRON A22L-CR-24A-20M.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)

A22L-CR-24A-20M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A22L-CR-24A-20M&select=5