OMRON A3CA-500GY A3CA-500GY

Appearance: Separate type.
Optical system: Through-beam.
Measuring width: 28mm.
Sensing distance: 0 to 500mm.
Resolution: 10µm.
Output type: NPN.
Measurable at any position.
The usual limitations, such as the ''measurement,
area being confined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome OMRON A3CA-500GY. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at or whichever way it is inserted A3CA-500GY
It can now be set to positions without interference from,
the work feed and without limitations of size of work area OMRON A3CA-500GY. Ratings: Standard load; 5 A at 250 VAC, 4 A at 30 VDC.
Cable: SJT(O) cable *3 .
Actuator: Sealed crossroller plunger.
Cable length : 3 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material OMRON A3CA-500GY.
Cable lengths of 3 and 5 m available on standard models.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
confirmation of operation.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)Safety sensors to detect contacts by.
mounting to moving parts of hazards.
Conforms to PLe/Safety Category 3 in combination with the,
dedicated controller.
(applied when internal relays with forcibly guided contacts,
disable hazard source directly).
Simple one-unit structure integrating sensor and cover.
Resistant to the side force.

Can be used inn various applications A3CA-500GY.
Sensor length: 150 mm to 6,100 mm, Height: 34 mm to 80 mm.
Models with sealing covers for doors are provided(SGE-245L).
Certified standard: EN1760-2 (Safety Edge Standard). Name: SYSMAC LINK Module.
Model: CC2000HW-SLK13 A3CA-500GY.
Communications method: N: N token bus.
Transmission method: Manchester code, base band.
Transmission path: Daisy chain.
Weight: 500g max.
A3CA-500GY Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A3CA-500GY&select=5