OMRON A7PH-206-PM-1 Price A7PH-206-PM-1

Socket body.
Representative examples of applicable models.
Pole number: 2.
General relay: MY series; MY2.
Socket for MY relay, G2R-S relay.
Save hours of Push-InPlus terminal type to add product series.
Using Plus Push-In terminal, compared with the previous screw terminals,
Save wiring time (compared with the previous screw terminals, can shorten the wiring time of about 60%*) A7PH-206-PM-1 Price.
Screw will not loose, to achieve maintenance free A7PH-206-PM-1
The insertion force is small, the drawing strength is big, and the wiring time is saved, and the high reliability is simultaneously considered.
When connecting multiple strands, the use of non - holding mechanism,
Insert a word screwdriver to keep it A7PH-206-PM-1 Price.
2 wires can be inserted in each terminal .
DIN guide rail installation, screw mounting common. Category: external supply 100mA DC5V type.
Input type: load sensor, mV input type.
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
DeviceNet; DeviceNet:--.
96 (W) * 48 (H * 95mm) depth.
Power supply voltage: AC100 ~ 240V A7PH-206-PM-1 Price.
To support the sensor input, the pressure, load, torque and weight were measured,
Is an ideal indicator for judging whether an automatic device and a screening device are qualified .
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gauge for monitoring the operation trend.
External event inputs can be applied to a variety of measurement and identificationInput / output: 32.
Pole number: 40.
I/O: input.
Common mode terminal: YES.
Connector mounting type: XG4A-4031.
Cable connector type: XG4M-4030-T.
The use of non threaded terminals can greatly reduce the amount of plant wiring and the required hours.
The caliper terminal so that you can no longer without fastening screws.
Only insert the rod - shaped terminal to complete a touch type wiring. Actuator: One-way action hinge roller lever.
Type: Standard.
Compact, General-purpose Horizontal.
Switches.
Models for Microloads Added to Series.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.),
Incorpoorates a switch with a ddurable coil spring in a tough,
high precision case OMRON A7PH-206-PM-1.
Compact and uses a single basic switch for applications where,
strength is required.
Models for microloads and models with operation indicators,
added to series.
Termminnal protective cover can be switched to wire cable from,
either the left or right OMRON A7PH-206-PM-1.
Sealing characteristics that meet IEC IP67 degree of protection.
A7PH-206-PM-1 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A7PH-206-PM-1&select=5