OMRON D4C-1410 Price D4C-1410

Pressure range: Negative pressure; 0 to -101 kPa.
ON/OFF output: Open collector (two independent outputs).
Linear output: 1 to 5 V.
Model: PNP output.
Pressure Sensor with.
Easy-to-Read LED Display.
Pressure status can be checked at a glance from the,
digital display and bar display.
Measurement pressure prevents incorrect outputs due,
to momentary pressure changes D4C-1410 Price.
Perform automatic teaching simply by teaching pressure,
values for good and bad products D4C-1410
Industry’s smallest models at just 28 × 28 × 29 mm.
Only in hysteresis mode. Support for a Wide Range of Applications with Position Control,
Speed Control, Torque Control D4C-1410 Price.
High-speed Response.
The G-series AC Servomotors and Servo Drives have,
achieved high-speed response capabilities, with a high,
response frequency of 1 kHz .
Suppressing Vibration of Low-rigidity Mechanisms during,
Acceleration/Deceleration.
The damping control function suppresses vibration of,
low-rigidity mechanisms or devices whose ends tend to,
vibrate. Two damping filters are provided to enable switching,
the vibration frequency automatically according to the direction,
of rotation and also via an external signal D4C-1410 Price. In addition,
the settings can be made easily merely by setting the vibration,
frequency and filter values, and you are assured of stable,
operation even if the settings are inappropriate.
High-speed Positioning via Resonance Suppression Control,
The realtime autotuning function automatically estimates,
the load inertia of the machine in realtime and sets the,
optimal gain. The adaptive filter automatically suppresses,
vibration caused by resonance. Also, two independent,
notch filters make it possible to reduce vibration of a,
mechanism with multiple resonance frequencies. Unit type: CS1 CPU Bus Units.
Product Name: MECHATROLINK-II,
compatible Position Control Unit.
Specifications: Control commands,
executed by MECHATROLINK-II,
synchronous communications.
Direct operation by ladder,
programming, Control mode:
Position control, speed control,
or torque control; No. of axes: 2.
No . of unit numbbers allocated: 1 OMRON D4C-1410.
Current consumption: 5V, 0.36A; 26V, --.
Standards: UC1, CE.
Decrease TCO with Simple Operation,
Reduced Wiring, Batch Settings,
and Batch Management.
Control Servos for up to 16 axes,
in a motion networkk wwith one Position,
Control Unit that supports MECHATROLINK-II OMRON D4C-1410.
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association.
D4C-1410 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=D4C-1410&select=5