AJ35PTC-CNV-SI MITSUBISHI AJ35PTC-CNV-SI

Category: Master station.
Transfer speed: 125kbps/250kbps/500kbps/1Mbps.
Transmission line form: bus system.
Total distance: 125kbps:1000m/250kbps:800m/500kbps:480m/1Mbps:240m.
The maximum connection units: 32.
Total points: input + output <=2048 point.
MITSUBISHI PLC detection, fault diagnosis and display and other procedures MITSUBISHI AJ35PTC-CNV-SI.
These procedures are relatively independent, generally in the basic completion of the program design and then add AJ35PTC-CNV-SI
MITSUBISHI PLC protection and chain procedures.
Protection and chain is an indispensable part of the program, must be carefully considered.
It can avoid the control logic confusion caused by illegal operations MITSUBISHI AJ35PTC-CNV-SI. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output .
Applicable model: A985/975/970/A960GOT (-B). Motor series: low inertia, medium power.
Rated output power: 6.0kw.
Rated speed: 1000r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI AJ35PTC-CNV-SI. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. Motor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.2kw.
Rated speed: 3000rpm.
With the brake: not with brake.
Without GB.
Shaft end: straight shaft.
A servo motor is an engine that controls the operation of the mechanical components in the servo system.
Servo motor can make the control speed, position accuracy is very accurate, can be converted to torque and speed voltage signals to drive the control object.
Servo motor rotor speed is controlled by the input signal, and can quickly response,
In the automatic control system, used as actuators, and ellectromechanical tiime constant, high linearity, initiating voltage characteristics,
The signal can be converted into a motor shaft on the angular displacement or angular velocity output AJ35PTC-CNV-SI.
Divided into DC and AC servo motor two major categories, the maain features are,
When the signal voltage is zero, there is no rotation,
The speed increases with the increase of the torque and the speed decreases AJ35PTC-CNV-SI.
AJ35PTC-CNV-SI Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=AJ35PTC-CNV-SI&select=5