HG-JR7034 MITSUBISHI HG-JR7034

For the GT1662-VNB.
Applicable model: GT16. Protective film for 15 inch screen.
Scrub (frame: white), 5.
Applicable model: GT15. Analog input expansion board (2 channel).A pack of 10.
Applicable models:
AJ65VBTS - - - type.
AJ65VBTCE - - - type.
AJ65VBTCU - - - type.
AJ65ABTP - - - type.
AJ65VBCU- - type MITSUBISHI HG-JR7034. Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Motor series: low inertia, medium power HG-JR7034
Rated output power: 11.0kw.
Rated speed: 1500r/min.
Whether to bring the brakes: with.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range MITSUBISHI HG-JR7034. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed MITSUBISHI HG-JR7034.
All motor dimensions are the same as before and all are compatible with the wiring . MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: general pulse interface type.
Power specification: single phase AC200V.
Pulse train and analog input as universal interface.
Can choose the position, speed and torque control mode.
The use of advanced tuning features such as advanced vibration suppression control and adaptive filter,
Greatly improve the performance of the machine.
MR-J3, your partner.
Higher performance, more features, more convenient to use.
Highest performance in the industry.
Speed response frequency up to 2.1kHz. Can be isolated to obtain DC24/48/100V, AC100/200V input signal.Motor series: low inertia, medium capacity.
Rated output power: 45.0kw.
Rated speed: 1500rpm.
With the brake: without.
Voltage: 400V level.
Shaft end: straight shaft.
The rottor of the serrvo motor is a permanent magnet, which is controlled by the U/V/W,
The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,
According to the feedback value and the ttargget value, the driver adjusts the rotation angle of the rotor HG-JR7034 HG-JR7034.
Accuracy of the servo motor depends on the accuracy of the encoder (number of lines).
HG-JR7034 Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=HG-JR7034&select=5