Proface GP3000H-CBLSD-10M GP3000H-CBLSD-10M

Expansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master communication512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Suitable for LT4000M/GP4000M series modules, 5.7 inch. Length: 5 meters Proface GP3000H-CBLSD-10M. For the DVI input to GP3000Analog /NPN output type.
Display size: 5.7 inches.
Resolution: 320 x 240 pixels (QVGA) GP3000H-CBLSD-10M
LCD:TFT.
Color: 65536 color.
Ethernet interface: 1.
Serial port: 1.
CANopen interface: 1.
USB (host):1.
USB (equipment):1.
Built in DIO input: 12 points.
Built in DIO output: 6 points Proface GP3000H-CBLSD-10M.
Built in AIO input: 4 points.
Built in AIO output: 2 points.
Common DIO:2 point high speed counter (with synchronous output) pulse capture input .
Dedicated DIO:2 point pulse output, PWM output.
Expansion module EX module: none.
Expansion module CANopen module: 63 stations.
Controller memory size: EPROM 132KB FLASH (equivalent to 15000 steps (up to 60000 steps).
CANopen network
LT4000M supports data exchange with a variety of remote devices through the CANopen, easy to achieve economic and easy to use system design Proface GP3000H-CBLSD-10M.
Can choose standard I/O module, also can choose action or control module and other more advanced products in complex application.
Flexible installation.
The control module can be installed on the DIN guide rail by using the split installation cable,
And the display module is installed in other locations.
Display module occupies a small space, even if the space is limited, but also can be flexible to install.
Compact size.
The volume is small but the display is fresh and bright, can create a rich and readable operation picture.
The control function of the whole and the digital I/O, analog I/O, analog temperature input and USB, serial port and Ethernet communication interface.
Integrated design.
Adopt integrative design, compact structure,
When the installation is only required to open a hole in the panel 22mm.
The display module or the control module can be easily replaced when the fault is eliminated. Expansion module for the GP3000 access to the CAANopen network and commmunication with the CANopen master stationInput points: 2 points GP3000H-CBLSD-10M.
External connection: 11 pin terminal connector
Input type:
Thermocouple Input
Type K: 0 to 1300
Type J: 0 to 1200
Type T: 0 to 400
Thermal resistance input
Pt1000::-100 to 500
Resolution: 12 GP3000H-CBLSD-10M.
Output points: 1 points.
Rated output voltage range: voltage output: 0 to 10V, current input: 4 to 20mA.
Resolution: 12.
GP3000H-CBLSD-10M Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=GP3000H-CBLSD-10M&select=5